MOC63u moisture analyzer

In many fields, a moisture analyzer is a necessary tool for quality control requirements. With the MOC63u, you can easily obtain accurate data. Simply place material on the pan and shut the cover. The MOC63u will start to measure. The MOC63u adapts to various materials and increases your work efficiency.

Features

• Halogen heater

Long-life and high power halogen heater provides quick and accurate measurement. The temperature can be changed from 50 degrees to 200 degree Celsius. You can check sample status from window while measurement.

• Large pan size: 95mm dia

MOC63u has large pwn. (95mm diameter) It can provide quick and accurate measurement to spread sample in thin layer on the pan.

• Built-in USB port

If you are connecting to the PC by USB, you will need the USB driver. Please download the driver here: USB Driver(64-bit), USB Driver(32-bit).

• Easy operation using a simple keypad

Features easy-to-operate software and keypad layout. In addition, an automatic starting mode saves measurement time, increasing your work efficiency. Operation simply requires 'putting material on the pan and shutting the cover'. Internal memory can save 10 measurement conditions and 100 results. Various measurement modes provide extra support.

 

Specifications

Capacity	60g
	0.02g
Minimum readability	0.001g
	0.01/0.1% (Selectable)
Repeatability	0.15% (2g)
	0.05% (5g)
	0.02% (10g)
Drying Heater	Straight type halogen heater
Power	400W
Temperature range	50-200°C (1°C increments)
Setting	(There is a time restriction when exceeding 180°C.)
Display	LCD with backlight
Pan size	95mm dia
Dimension	(W×D×H) mm 202 × 336 × 157
Weight	4kg
Operational temperature and humidity range	5 to 40°C, 85%RH or lower
Measurement modes	Standard
	(Easy start/Automatic end/Timed end)
	Rapid drying
	(Easy start/Automatic end/Timed end)
	Slow drying
	(Easy start/Automatic end/Timed end)
	Step drying
	(Easy start/Automatic end/Timed end)
Timer setting	1-120 minutes or continuous
	(max 12 hours)
Interface	RS-232C (9-pin connector) I/O port
	USB port
Measurement conditions data memory	10
Data memory	100

Optional accessories

Optional accessories	Printer EP-80
	Printer EP-90
	In-use protection cover for display (5 pieces)
	Aluminum sheet
	Fiberglass sheet
	Temperature calibration kit
	Sample pan (SUS)
	RS-232C cable
	USB connection cable
	Halogen heater for replacement